Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the old frame very easily. However If you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is large, you might think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they may be afflicted by a variety of problems including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen. This is often caused by screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and then perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

It is a fairly easy fix that can be completed by any DIY expert. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer of caulk can be put on. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges will wear out over time. It's easy to change the hinges on a window however it is easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer advice.

It is also important to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your Upvc Window Repair windows.

5. Draughts

Draughts can be caused by different things. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. They can be fixed by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge of the window, can also be misaligned, and again it may be feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be positioned on the windowsill on top. They can help keep cold air out and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to recognize that all windows have a life span and there may come a point where it is more economical to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as possible.